Browse all practice questions for the Modernized Target Acquisition Designation Sight (MTADS) Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Modernized Target Acquisition Designation Sight (MTADS) Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Can both crew members have the same ACQ Source?
  • Which cueing format is the most accurate?
  • What considerations are important when practicing MTADS in degraded weather?
  • What does the ACM button do on the TEDAC?
  • How is the Range and Range Source Field positioned relative to the Field of Regard (FOR) on the High Action Display?
  • What happens to the KU when auto range is selected on the WPN page via the MANRNG option?
  • If the CPG designates a target, what HAD range/range source indicator signals laser spillover?
  • From which pages can the crew Cursor Acquire an icon?
  • What does the SLAVE button do?
  • DTV has how many fields of view, and what is the M designation?
  • What is the purpose of the SLAVE button on the RHG?
  • Internal boresight frequency and flight capability: Which statement is correct?
  • To change the LT code from B to D, which page should be selected?
  • Initial Sight selection of TADS will cause the TADS to move to which position?
  • Which components comprise the primary MTADS subsystems?
  • In MTADS maintenance, what is the purpose of a boresight target?
  • Name the six available range sources in the CPG station.
  • Which factor can degrade MTADS image quality and range estimation?
  • How many fields of view are available if the CPG is using the TADS as a sight with the FLIR as the selected sensor?
  • Why is MTADS imagery used during target engagement?
  • MTADS stows at ________ degrees _________.
  • During manual tracking with Scene Track enabled, which statement describes the gating process before a new Scene Track is established?
  • During Point-Track, what symbol indicates that the system is observing with the alternate sensor?
  • After completing the DTV boresight, to begin the FLIR boresight, what action is required?
  • Which capability is developed by MTADS practice under night conditions?
  • Where is the current Range and Range Source displayed?
  • IHADSS stands for which of the following?
  • The ASE page will allow cursor selection of which icons?
  • Which sensors are selected using the LHG sensor select switch?
  • What does the Linear Motion Compensation (LMC) button do?
  • How does MTADS handle laser safety during designation?
  • The LT switch is functional when which LOS is selected?
  • What is the backseat default range?
  • What happens if MTADS experiences a partial component failure?
  • Is the Ground Override switch required to be in override for laser firing during internal boresight?
  • During an internal boresight, which statement best describes the relationship of the FLIR and DTV boresight fields?
  • Which sight is not selectable from the pilot's crew station?
  • Which MTADS capability directly reduces the risk of a single-point failure?
  • How do you auto ranger focus with the R/F button?
  • What should be checked if the MTADS display is blank?
  • Which of the following best explains the cause of a video not available MTADS fault?
  • MTADS turret elevation travel is _____ degrees up, ______ degrees down from the null position.
  • What indicates a successful target designation in MTADS?
  • When the aircraft is initially powered, what will be displayed in the Sight Select Status of the HAD?
  • LT operations can be initiated in which switch modes?
  • SANUC stands for?
  • Which seat has a default range of 3.0 KM?
  • What maintenance actions should precede MTADS flight?
  • What does TEDAC stand for?
  • FLIR has how many fields of view?
  • How does MTADS reduce pilot workload?
  • In MTADS, which crew member primarily handles TADS and laser designation?
  • SBIT for MTADS begins at power-up and tests for approx. ______ seconds.
  • What message appears when the FLIR is cooled and ready but not selected?
  • What is a typical MTADS fault isolation check?
  • Which condition would most directly indicate misalignment warnings on MTADS?
  • During internal boresight, which sensors' boresights are used?
  • How do MTADS upgrades improve reliability and redundancy?
  • Which item is not a major subsystem in the AH-64E sighting system?
  • How does MTADS contribute to night-time survivability?
  • What steps should be taken if MTADS alignment drifts during flight?
  • Laser trigger second detent release will cause the range to be dynamic for how long?
  • How does MTADS ensure proper cueing to the fire-control system?
  • What switch is used to delete a track?
  • How can MTADS be used for target area designation?
  • What is the cage button used for?
  • Which handgrip contains the Enter Button used to interact with TEDAC?
  • What is the main objective of the MTADS alignment procedure?
  • Which range source is used when the system automatically determines range?
  • What is a typical MTADS designation training objective?
  • What is the role of the fire-control system in MTADS?
  • In MTADS operations, when might an operator rely on alternative targeting methods?
  • What might trigger a video not available MTADS fault?
  • CPG can choose between which sensors?
  • Which configurations allow the pilot to use the TADS as a sensor?
  • How long does it take to complete a FULL SANUC?
  • If sensor co-registration is not maintained, what is the most likely effect on designation cues?
  • What is the correct initialization sequence for MTADS before flight?
  • Which statement best describes CAQ availability on MTADS?
  • Which of the following describes the message generated when a target is deleted or dropped and where will it be displayed?
  • Which statement best describes MTADS laser safety during designation?
  • Which weapons typically integrate with MTADS target designation?
  • What does the M-TEU do?
  • What is the default acquisition source?
  • Which sights can be selected from the CPG crew station?
  • What does the head down display (HDD) button do?
  • Which statement about SANUC in MTADS is true?
  • How often is it recommended that an internal boresight be conducted? Can it be completed in flight?
  • Which environmental factors affect MTADS performance?
  • Which MTADS sensor provides forward-looking infrared imagery for target reconnaissance?
  • When does the TADS power up during an external power start?
  • Which statement is accurate regarding target contrast and MTADS performance?
  • What is the function of the PNVS in MTADS?
  • When is an internal boresight required?
  • How does the CPG regain control of the TADS LOS after the LT locks onto a laser spot?
  • What are common MTADS fault indicators a crew should recognize?
  • How many fields of view are available if the CPG is using the TADS as a sight with the Day TV as the selected sensor?
  • Which component or mechanism ensures cueing to the fire-control computer?
  • How many switches are identical in position and functionality between the collective and the LHG?
  • After pressing the AZ/EL button, how long does it take before the AZ and EL switches are active?
  • Which statement about acquire vs designate is correct?
  • Which statement best reflects a typical MTADS designation training objective?
  • What is the purpose of the MTADS alignment procedure?
  • What is the max slew rate of the TADS?
  • Where is the laser trigger located on the TEDAC grip?
  • Differentiate between acquire vs designate in MTADS terminology.
  • Which pages enable the crew to change the acquisition source?
  • Can the CPG switch the sensor in use if there is a Point-Track established?
  • Which major subsystems make up the AH-64E sighting systems?
  • How does MTADS handle multiple targets in its field of view?
  • If the CPG uses LMC to track a target while the aircraft is moving, what must the CPG provide to maintain a valid LMC track?
  • What are typical MTADS standby modes?
  • What is the role of MTADS training in certification?
  • During SANUC initialization, which video can be lost?
  • If MTADS imagery is viewed on a head-mounted display, which component is used?
  • Which button is used to store the HMD position, identical to pressing the HMD store button on the cyclic?
  • Using the Keyboard Unit to engage auto range, which input must be selected and entered?
  • What is the immediate system response after proper laser energy acquisition by LT?
  • How does MTADS integrate with the cockpit displays?
  • If the CPG attempts to CAQ an RFI Icon from the TSD after sight-selecting the FCR, what will occur?
  • How is data integrity maintained between MTADS and flight-control computers?
  • Which action is specifically included in preflight MTADS checks to ensure targeting accuracy?
  • What does the asterisk indicate while lasing when multiple returns are received within more than 15 meters?
  • Why is bore sight critical for MTADS?
  • When is a manual Servo Drift Null procedure required?
  • From the center null position, MTADS turret azimuth travel is how many degrees to the left or right?
  • On which page can you use CAQ to select icons?
  • Which statement is true about the initial TADS position after sight selection?
  • Which two controls allow the CPG to select ENTER on the TEDAC?
  • What does boresight mean in MTADS?
  • What are tactical cues in MTADS displays?
  • Describe the sequence from acquiring to tracking a target in MTADS.
  • The laser trigger is located on which TEDAC grip?
  • What is the primary benefit of MTADS integration in terms of pilot workload?
  • HAD stands for what in display terminology?
  • Can the CPG switch from FLIR to DTV during manual tracking?
  • Which sights can be selected from the pilot's crew station?
  • Which MTADS function provides laser energy for designation?
  • How does MTADS support designation for missiles such as Hellfire?
  • Which of the following is NOT a range source at the CPG station?
  • How does atmospheric heat shimmer affect MTADS?
  • Why is crew coordination important when initializing a SANUC?
  • Which sensor is boresighted first during an internal boresight?
  • What is a sight?
  • If the CPG designating a target, what will precede the laser range when the laser is receiving valid reflected energy?
  • What should be verified during MTADS initialization beyond self-tests?
  • When MTADS provides designation data, what is the expected result for the weapon?
  • Where can the crew look to determine what sight has been selected?
  • The LHG sensor select switch allows the CPG to choose between which TADS sensors?
  • The HAD message 'SANUC REQUIRED' displays until which condition is met?
  • The MTADS TADS turret azimuth travel from the center null position is how many degrees?
  • What is the front seat default range?
  • Which display can show the current sight selection besides the HAD?
  • How does MTADS support day and night operations?
  • What can cause MTADS image misalignment between TADS and PNVS?
  • When does the TADS power up during an APU start?
  • Which control aids in visually tracking moving targets by moving MTADS at a constant rate with no input from the CPG?
  • How is target range determined in MTADS?
  • When ACM is boxed, what authority level do crew members maintain over level and gain?
  • Which item is NOT listed as affecting MTADS performance?
  • Which statement describes what happens to turret control when properly coded laser energy is acquired by LT?
  • How long does it take to complete a ONE TOUCH SANUC?
  • During manual tracking, when the CPG moves the TADS with the Scene Track enabled, what does Scene Track do after the CPG stops moving?
  • What safety precautions accompany MTADS laser designation?
  • Which action on the WPN page wakes up the KU when enabling auto range?
  • When the pilot sight selects TADS from the collective mission grip, what happens?
  • What is the significance of sensor co-registration in MTADS?
  • If MTADS cannot boresight correctly, what is the likely consequence?
  • Which statement best summarizes MTADS overall function during engagement?
  • Which of the following is active five seconds after pressing the AZ/EL button?
  • Which imagery does MTADS provide for night operations?
  • Which approach allows engaging multiple targets within the field of view?
  • What is the function of the SLAVE button on the RHG?
  • Which page should be selected to change the LT code from 'B' to 'D'?
  • The CPG has the FCR as their selected sight. If the pilot takes the FCR from the CPG, what will the mission processor use as the CPG's new LOS?
  • What sights are available to the CPG?
  • How does MTADS support missile engagement with designated targets?
  • Which statement about Field Of View during laser ranging and designation is true?
  • Which fusion-based approach determines target range in MTADS?
  • What does the * button do on the TDU?
  • Where would you find the TRK 1 DEL message when a target is deleted?
  • Can the CPG move the TADS using the Sight Manual Tracker if the Scene Track is enabled?
  • What is the role of laser designator fault messages?
  • In what capacity can the pilot use the TADS?
  • When using the laser to range or designate, which Field Of View should be used and why?
  • What symbol appears on the Sight Select Status of the HAD on initial power-up?
  • What is the default sight for both crew members?
  • Why practice MTADS under night conditions?
  • What does SANUC do?
  • Once the laser energy has been acquired, what will the TADS do?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy